Ray Magic 16
Ray Magic Beams is a versatile radiant gypsum panel that can be cut-to-size to be installed in narrow spaces where Ray Magic or other panels are too wide. Ray Magic Beams is the radiant panel that can be cut-to-width to fit the most arduous narrow spaces.Long and narrow areas can pose serious challenges for radiant designers, for these situations Messana has developed a new panel that can be customized.
Long and narrow areas can pose serious challenges for radiant designers, for these situations Messana has developed a new panel that can be customized.
Ray Magic panels can be cut in half, lengthwise and widthwise, into sub-panels to better cover smaller areas and fulfill almost any building requirement. Cutting the panel is as simple as cutting drywall.One Ray Magic 16 full sheet can be cut into two panels (23 ½ x 94 ½ “)*, each one with integrated supply and return lines.
This is the main difference compared to Ray Magic standard panel in a 2 x 8 sub module that requires an external pre-insulated backbone line (or a split configuration).
Furthermore, each panel can be narrowed down to 16” to fit in spaces with restricted width and make it easier in many particular situations that can be a challenge for radiant ceiling designers, such as:
- accommodate lights in narrow spaces
- in between ceiling beams
- custom measurements
When needed the panel can be shorted to 47 ¼ ft.
The connection between adjacent panels (up to 20 panels in series, for a total 162 ft in length).
Ray Magic BEAMS panels are available in different finishes, regular ½ drywall, ¼” and 10mm graphite.
* Because it is not a full 8 ft long (2400mm), it might be necessary some extra frame blocking to be properly anchored to the ceiling